Hobie Pro Angler Fish Finder Install

| February 1, 2014 | 1 Comment

Ryan Herzog is a competitive kayak angler and recently shared his Hobie Pro Angler Fish Finder installation on the Austin Kayak Fishing forum. This content has been re-posted with his permission.

I recently picked up a Humminbird 998 with side imaging. The first issue that came to mind was where/how to mount the transducer. I knew because of the side imaging, that the transducer would not work up in the transducer covey that already existed on the Pro Angler. After some thought and seeing how the Mariner guys mounted their transducers off of the back, I figured that would be the best option.

First thing I had to do to install my new Hobie Pro Angler fish finder was to make a small modification on the H-bird metal mounting bracket. I drilled out the middle slot to 1/4 inch so that I could mount a RAM 1″ screwball.

I then mounted one of these to the back hand rail of the PA:

RAM Part # RAM-B-231ZU (ACK Special Order).

RAM Part # RAM-B-231ZU (ACK Special Order).

From there, I stole the 3.5″ RAM arm from my existing FF mount and put it all together:

After much deliberation, I decided to have the exit point of the cable on the high point of the back of the boat using the Hobie Thru Hull Wiring Kit to ensure a good seal on the hole. Left a little slack in the cord for adjustments. Once I have it fine tuned out on the water, I’ll seal everything up.

Just an FYI for PA owners. Here is an inside shot (Video) of the boat from the back hatch looking towards the drain plug.  You can see the rudder lines and the pully on one side. The back is clear for the most part:

Tags: , , , , , , , ,

Category: How To, Kayak Fishing, Knowledge, Resources

Comments (1)

Trackback URL | Comments RSS Feed

  1. Gerbrand says:

    I was wondering if you have an idea about the new 360 bow mount from hummingbird if it would work on the ‘PA. I have tried come up with some ideas and do have some but my concern is just the hardware that come with to make it work with a 898c hd si and the PA.

Leave a Reply

Your email address will not be published. Required fields are marked *